Semi Precious Stones Powers

semi precious stones powers

Gem Stones

A gemstone or gem (also called a precious or semi-precious stone, or jewel) is a piece of attractive mineral, which—when cut and polished—is used to make jewelry or other adornments. However certain rocks, (such as lapis lazuli) and organic materials (such as amber or jet) are not minerals, but are still used for jewelry, and are therefore often considered to be gemstones as well. Most Gem Stones are hard, but some soft minerals are used in jewelry because of their lustre or other physical properties that have aesthetic value. Rarity is another characteristic that lends value to a gemstone. Apart from jewelry, from earliest antiquity until the 19th century engraved gems and hardstone carvings such as cups were major luxury art forms; the carvings of Carl Fabergé were the last significant works in this tradition.

For example, diamonds are made of carbon (C) and rubies of aluminium oxide (Al2O3). Next, many gems are crystals which are classified by their crystal system such as cubic or trigonal or monoclinic. Another term used is habit, the form the gem is usually found in. For example diamonds, which have a cubic crystal system, are often found as octahedrons.

Gem Stones are classified into different groups, species, and varieties. For example, ruby is the red variety of the species corundum, while any other color of corundum is considered sapphire. Emerald (green), aquamarine (blue), bixbite (red), goshenite (colorless), heliodor (yellow), and morganite (pink) are all varieties of the mineral species beryl.

Gems are characterized in terms of refractive index, dispersion, specific gravity, hardness, cleavage, fracture, and luster. They may exhibit pleochroism or double refraction. They may have luminescence and a distinctive absorption spectrum.

There are no universally accepted grading systems for any gemstone other than white (colorless) diamond. Diamonds are graded using a system developed by the Gemological Institute of America (GIA) in the early 1950s. Historically all gemstones were graded using the naked eye. The GIA system included a major innovation, the introduction of 10x magnification as the standard for grading clarity. Other gemstones are still graded using the naked eye (assuming 20/20 vision).

A mnemonic device, the “four C’s” (color, cut, clarity and carat), has been introduced to help the consumer understand the factors used to grade a diamond. With modification these categories can be useful in understanding the grading of all gemstones. The four criteria carry different weight depending upon whether they are applied to colored gemstones or to colorless diamond. In diamonds, cut is the primary determinant of value followed by clarity and color. Diamonds are meant to sparkle, to break down light into its constituent rainbow colors (dispersion) chop it up into bright little pieces (scintillation) and deliver it to the eye (brilliance). In its rough crystalline form, a diamond will do none of these things, it requires proper fashioning and this is called “cut”. In gemstones that have color, including colored diamonds, it is the purity and beauty of that color that is the primary determinant of quality.

Physical characteristics that make a colored stone valuable are color, clarity to a lesser extent (emeralds will always have a number of inclusions), cut, unusual optical phenomena within the stone such as color zoning, and asteria (star effects). The Greeks for example greatly valued asteria in gemstones, which were regarded as a powerful love charm, and Helen of Troy was known to have worn star-corundum.

Historically gemstones were classified into precious stones and semi-precious stones. Because such a definition can change over time and vary with culture, it has always been a difficult matter to determine what constitutes precious stones.

A few gemstones are used as gems in the crystal or other form in which they are found. Most however, are cut and polished for usage as jewelry. The picture to the left is of a rural, commercial cutting operation in Thailand. This small factory cuts thousands of carats of sapphire annually. The two main classifications are stones cut as smooth, dome shaped stones called cabochons, and stones which are cut with a faceting machine by polishing small flat windows called facets at regular intervals at exact angles.

Stones which are opaque such as opal, turquoise, variscite, etc. are commonly cut as cabochons. These gems are designed to show the stone’s color or surface properties as in opal and star sapphires. Grinding wheels and polishing agents are used to grind, shape and polish the smooth dome shape of the stones.

Gems which are transparent are normally faceted, a method which shows the optical properties of the stone’s interior to its best advantage by maximizing reflected light which is perceived by the viewer as sparkle. There are many commonly used shapes for faceted stones. The facets must be cut at the proper angles, which varies depending on the optical properties of the gem. If the angles are too steep or too shallow, the light will pass through and not be reflected back toward the viewer. The faceting machine is used to hold the stone onto a flat lap for cutting and polishing the flat facets.Rarely, some cutters use special curved laps to cut and polish curved facets.

Color is the most obvious and attractive feature of Gem Stones. The color of any material is due to the nature of light itself. Daylight, often called white light, is actually a mixture of different colors of light. When light passes through a material, some of the light may be absorbed, while the rest passes through. The part that is not absorbed reaches the eye as white light minus the absorbed colors. A ruby appears red because it absorbs all the other colors of white light (blue, yellow, green, etc.) except red.

The same material can exhibit different colors. For example ruby and sapphire have the same chemical composition (both are corundum) but exhibit different colors. Even the same gemstone can occur in many different colors: sapphires show different shades of blue and pink and “fancy sapphires” exhibit a whole range of other colors from yellow to orange-pink, the latter called “Padparadscha sapphire”.

This difference in color is based on the atomic structure of the stone. Although the different stones formally have the same chemical composition, they are not exactly the same. Every now and then an atom is replaced by a completely different atom (and this could be as few as one in a million atoms). These so called impurities are sufficient to absorb certain colors and leave the other colors unaffected.

About the Author

I am Mohan read mathematics at Stanford and remained there for his MS. From 1998-1999 on researched in Evolution and in Animal Behavior in Camrbidge, UK. I was was then a professor in the departments of Anthropology and Biology, New Jersy College, USA. Now teaches at the department of Zoology. Carried out research in several areas of evolutionary biology, particularly in sexual selection and the comparative method.

Carnelian Red Wood Silver Coloured Custom Order

Semi Precious Pink Rose Quartz Love Stones Power Charm Bracelet Angel Wing Wings

$9.47

Semi Precious Brown & Blue Opal Stone Power Bracelet Angel Wing Wings charms

$9.47

Bali Silver flower Power Dezign pendant &necklace beautiful semiprecious stones

$28.00

CSS-1010 CRYSTAL HEALING POWER SET OF 12 STONES NATURE SEMI-PRECIOUS STONE

$14.99

CSS-1009 CRYSTAL HEALING POWER SET OF 12 STONES NATURE SEMI-PRECIOUS STONE

$14.99

Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool – Glass, Stone, Ceramic

$1.10

Professional Quality, 1/8 in. Shank, 180 Grit. Includes 20 assorted shapes covered with diamond particles. All bits have 1/8 in. shanks and come in convienient plastic holder. Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials….

Anytime Tools 5 pc DIAMOND DRILL BIT SET for GLASS ROCK STONE TILE Wire Gauge #36 – #60

$10.00

Drill glass, marble, masonry, rocks, concrete etc… Drill glass, marble, masonry, rocks, concrete- just about anything you want! Super duty diamond coating on nickel plated high speed steel will give you excellent results even in semi-precious stones. Fluteless design brings more diamonds in contact with your stock. Lasts longer and works better than twist designs. Numbered sizes: #36 (0.1065″), …